blog

AT4021 vs. AT3031 – Small Diaphragm Condenser Microphones

GET THE X32 ROUTING WORKSHEET FOR FREE!

I FOUND THAT OVER THE YEARS, HAVING MY ROUTING WRITTEN DOWN NOT ONLY MADE MY JOB EASIER BUT IT MADE ME FASTER AT MY JOB!

AS A THANK YOU FOR COMING TODAY, I WANT TO GIVE IT TO YOU!

Subscribe Me
FEATURED ON...
by Drew Brashler in All Posts, Microphones
February 19, 2016 0 comments
AT4021 vs. AT3031 - The Audio-Technica AT4021

Today, I want to talk about Small Diaphram Condenser microphones, also called pencil condensers. This type of microphone has a lot of uses in both live sound reinforcement and inside the studio. My favorite things to use these microphones on is acoustic instruments like the guitar, mandolin, drum set for overheads, bottom snare mic, cymbals. The gamut of different uses is quite vast with these microphones.

Two microphones that I want to focus on are the AT4021 and the AT3031, both made by Audio-Technica. Audio-Technica has always produced high-quality gear. Their microphones have been a part of my selection for as long as I can remember. Clarity is the first thing I think of when explaining an Audio-Technica microphone. The Audio-Technica AT3031 was released in 2001 and the Audio-Technica AT4021 replaced it in 2008. The specs of the microphones are very similar, so I wanted to see how similar they were.

Let’s look at the specs of the two microphones:

Audio-Technica AT3031:

AT4021 vs. AT3031 - The Audio-Technica AT3031

  • Frequency Response: 30-20,000kHz

  • Sensitivity: 19.9mV at 1 Pascal

  • Impedance: 250 ohms

  • Max SPL: 148 dB (@ 1%T.H.D.), 158 dB SPL

  • Self Noise: 16dB (A Weighted)

 

Audio-Technica AT4021:

AT4021 vs. AT3031 - The Audio-Technica AT4021

  • Frequency Response: 20-20,000kHz

  • Sensitivity: 19.9mV at 1 Pascal

  • Impedance: 250 ohms

  • Max SPL: 146 dB (@ 1%T.H.D.), 156 dB SPL

  • Self Noise: 14dB (A Weighted)

 

Inside the Audio-Technica AT3031

Call me crazy, but I decided to open the microphones to find any differences inside. The Audio-Technica AT3031, had surface mount components and its main capacitors (47uF 50V, 1uF 50V) were surface mount as well. I was not able to find out the manufacture of the main capacitors. Here is the image of the board:

Audio-Technica AT3031 Inside

Peering inside of the microphone body the capsule is mounted with a small pin that protrudes inside the mic body to connect to the circuit board. When you look inside, the back of the capsule looks like this:

Audio-Technica AT3031 Capsule

Inside the Audio-Technica AT4021

The Audio-Technica AT4021 also had surface mount components, however, the main capacitors (47uF 50V) were Nicihicon Fine Gold audio quality capacitors.  These caps are through hole capacitors and are much better for audio circuits than normal capacitors.  The circuits were different inside with a few things being the same. It looks like Audio-Technica redid the design using a better quality design.  One thing that is noticeable is the change of the connection head on the circuit board. This clear plastic holds a connection point to the capsule. Audio-Technica did change the shape of this.

Audio-Technica AT4021 Inside

Looking at the back of the microphone capsule, it is hard to find any differences between this and the older Audio-Technica AT3031. Take a look:

Audio-Technica AT4041 Capsule

AT4021 vs. AT3031

Hearing that these microphones sounded so similar, I decided to do a simple RTA test. I set up a test rig in front of my Mackie near-field studio monitors.  I made a mic calibration file off of my Behringer ECM8000 and did the tests in reference to that. By doing this, it made the near-field speaker have a near flat response. There is a WAY more scientific way of setting this up, but I wanted a quick test.

AT4021 vs. AT3031 - Testing

AT4021 vs. AT3031 - Testing

I ran pink noise through the monitors, generated from the Behringer X32. Microphones were routed through a small mixer and then into the line-in of a computer and then into Smaart by Rational Acoustics. Here are the tests, I separated the two microphone lines a bit so you could see.

AT4021 vs. AT3031 - Testing_003

AT4021 vs. AT3031 - Testing

Now question is, which mic is which! Can you guess?

These two microphones seem to be extremely similar, if I was to guess, I would say that the capsules are the same but the inside circuitry is the fairly similar. The Audio-Technica AT4021 can be found retail at $349, used prices seem to be right under $300. The Audio-Technica AT3031, when it was still in stock, retailed for $169, they can be found used for $110-140.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

GET THE X32 ROUTING WORKSHEET FOR FREE!

I FOUND THAT OVER THE YEARS, HAVING MY ROUTING WRITTEN DOWN NOT ONLY MADE MY JOB EASIER BUT IT MADE ME FASTER AT MY JOB!

AS A THANK YOU FOR COMING TODAY, I WANT TO GIVE IT TO YOU!

Subscribe Me